1P & 1P+N
SMICO
Availability: | |
---|---|
SMICO Electric house service cut outs cater for single and triple pole installations and offer reversible mounting in Combined Neutral and Earth (CNE) or Separate Neutral and Earth (SNE) configurations. A choice of cable protection or sealing chamber accessories provide the required levels of security, whether it is for existing or new installations.
Designed and tested to BS 7657:2010, the HSCOs are manufactured from tough, impact resistant glass fibre polyester material with heavy duty brass terminals. Variants are offered for 60 / 80A applications with 22mm diameter fuse clips or 100A applications with 30mm diameter clips. Close coupled HSCOs which mate directly to the meter housing are also available to counter instances of theft of supply.
Presented as part of single pole or triple pole kits, flame retardant slope board assemblies more suited to new builds where the service cable runs up the outside of the dwelling as opposed to in the cavity. They still allow full reversibility of the cut outs i.e. with neutral mounted on the left or on the right. Incorporating an innovative insulated gaiter to protect the live conductor ends, a dedicated derivative allows live cabling during the replacement of cast iron cut outs on PILC cables. The cable chamber lower half has an obround multi entry grommet which is split such that it can easily be slipped around the PILC cable without resetting and potentially damaging the cores and gives a choice of three positions for the cable. Reversibility of the cut out is again easily performed and unused entries in the grommet are blocked off with plugs.
Item | In(A) | |
CUT OUT 1P | ||
22mm | 30A | |
22mm | 60/80A | |
30mm | 100A | |
22mm | 30A | |
22mm | 60/80A | |
30mm | 100A |
SMICO Electric house service cut outs cater for single and triple pole installations and offer reversible mounting in Combined Neutral and Earth (CNE) or Separate Neutral and Earth (SNE) configurations. A choice of cable protection or sealing chamber accessories provide the required levels of security, whether it is for existing or new installations.
Designed and tested to BS 7657:2010, the HSCOs are manufactured from tough, impact resistant glass fibre polyester material with heavy duty brass terminals. Variants are offered for 60 / 80A applications with 22mm diameter fuse clips or 100A applications with 30mm diameter clips. Close coupled HSCOs which mate directly to the meter housing are also available to counter instances of theft of supply.
Presented as part of single pole or triple pole kits, flame retardant slope board assemblies more suited to new builds where the service cable runs up the outside of the dwelling as opposed to in the cavity. They still allow full reversibility of the cut outs i.e. with neutral mounted on the left or on the right. Incorporating an innovative insulated gaiter to protect the live conductor ends, a dedicated derivative allows live cabling during the replacement of cast iron cut outs on PILC cables. The cable chamber lower half has an obround multi entry grommet which is split such that it can easily be slipped around the PILC cable without resetting and potentially damaging the cores and gives a choice of three positions for the cable. Reversibility of the cut out is again easily performed and unused entries in the grommet are blocked off with plugs.
Item | In(A) | |
CUT OUT 1P | ||
22mm | 30A | |
22mm | 60/80A | |
30mm | 100A | |
22mm | 30A | |
22mm | 60/80A | |
30mm | 100A |