Aerial Power Fitting - Zhejiang Smico Electric Power Equipment Co.,ltd

You are here: Home » Products » Aerial Power Fitting

Aerial Power Fitting

Aerial power fitting is also called overhead line hardware or overhead line accessories.
The overhead line fittings include a wide range of steel fittings that are used to construct the overhead line.

SMICO overhead line fittings are for use in electricity distribution networks including 11/33kv overhead lines and associated substations.
SMICO is a professional overhead line fitting manufacturer, most of our fittings are hot-dip galvanized coatings according to ISO1461.

Top Overhead Line Fitting Manufacturer and Supplier

SMICO overhead line fitting is designed to hang, connect or protect conductors or insulators.
At the dead-end pole, SMICO overhead line fitting is all kinds of parts which used to connect the stay wire.
According to the function, SMICO overhead line fittings can be divided into:

Overhead Line Fitting

Overhead lines basically refer to posts or columns that are used in supporting overhead public utilities.

These utilities include overhead lines, overhead cables, streetlights, transformers, as well as fiber optic cables.
These overhead lines are required for insulating these utilities from touching the ground and also for ensuring that vehicles or people do not interrupt them or get affected by them.

Owing to the fact that these overhead lines ensure the safety of the people and also insulate various overhead utilities, they need to be made from materials that are durable and strong.

Overhead line fittings are also known to include fasteners, which enable them to support cables comprehensively. These fasteners, which are also known as crossover clamps, are made in different dimensions, to support different sized cables and are usually used at important junctions that occur between many cables, to help stabilize them.

What are Overhead Line Fittings?

Overhead line fittings are basically accessories that are used to attach one component of an overhead power line into another component or unit.
For instance, a fitting can connect the conductor to the tension strings.
Other fittings are attached to the insulator or even to the same conductor to perform a different role.

Insulation piercing connector

This IPC (Insulation Piercing Connector) is used to establish a tap connection from low voltage ABC (Aerial Bundled Conductors) to a low voltage aluminium alloy or copper bare main conductor.

Dead end clamp

This is another important fitting on an overhead line.
The main function of the dead-end clamp as overhead line hardware is to complete the connection of the overhead lines to the pole
This type of clamp comprises different components such as a piercing connector and is made of high-quality material.
Commonly used materials are for dead-end clamps are steel and aluminum.

Suspension clamp

Suspension clamp is overhead hardware that clamps a conductor or cable longitudinally to the pole.
The arms of the clamp extend outwards to whichever direction that you would like the cable to.
Even though the clamp holds on tight to the cable, it still allows it to oscillate freely along with it but within a well-defined limit.

Stainless steel

Band and buckle can be quickly formed to suit virtually any diameter .
Applications include hose clamps ,pipes ,signs ,cables ,especially where superior strength is required .
Dispensers-Handy plastic dispensers available with certre turn facility and pocket for buckles .
Excellent corrosioin resistance

Tension Clamp

The tension clamp is an overhead fitting whose purpose is to terminate the conductor at different points.
It also provides electrical and mechanical connections to the insulator.
Tension clamp also serves as a protective fitting to the conductor.

Parallel groove clamp

Parallel groove clamp AL is designed to connect two parallel bare aluminum conduc- tors in low voltage cable lines, service line system, street lightning and buildings.

Pole mounted fuse switch disconnector

SMICO APDM basic function of 160A Pole Mounted Fuse Switch Disconnecter for NH fuse link is to protect and disconnect a network during faults and is specially designed for on-load switching. The switch offers a reliable medium for disconnection and protection of fully insulated open wire network. The fuse switch is versatile and ideally suited for mounting directly to poles, transformers and cross arms.

Bimetal Aluminium copper terminal lug

Bimetal Aluminium copper terminal lug are mostly useful where an aluminum cable has to be terminated by a copper bus bar or copper contact. If Cable Lugs of only copper or aluminum are used , a galvanic action occurs due to dissimilar contact. The use of bimetallic lugs thus ensures a technically sound and durable joint. The Aluminum barrel is friction welded to the copper palm thereby achieving the best possible transition between barrel & palm.

Anchor clamp for four core of aerial bundle conductor

SMICO dead end clamp, anchor clamp is designed to anchor the low voltage fully supported A.B.C. (Aerial Bundled Conductors).

What are the Functions of Overhead Line Fittiing

Probably you are wondering about the specific roles that are played by overhead line fittings.
Or are they just used to add aesthetic value to the power lines?
To give you a better understanding, here are some of the critical functions that are performed by the power fittings:

-To connect the conductor and the insulator to the poles or tower
-To protect the conductor and the insulator from stress and other mechanical forces
-To streamline the transfer of electric loads in a conductor
-To secure the cable and the conductor through the slip-hole
As you can see, the accessories mainly play a supporting role.
Theirs is to ensure that the main components of the overhead lines work smoothly as expected.

Properties Overhead Line Fittings

Before being supplied to the market, overhead line fittings must undergo a series of tests to ensure that they meet certain standards.
These standards are what define the properties of the accessories.

Of course, there are several reasons why this should be done.
First, the fittings will be exposed to vagaries of nature such as wind, rain, excess temperatures among others.

The tests are done to ensure that the fittings can withstand such conditions.
The second reason is to test the mechanics of the fittings.
Since the fittings will be connected to other components, there is a dire need to ensure that there is a seamless connection between all the components.
So, what are some of the properties that define the quality of overhead line fittings?

Material Properties of Overhead Line Fittings

There are certain requirements that define the ideal material of an overhead power line accessory.

One of them is hardness.

The material should be hard enough to survive any physical abrasions.
It should not bend or even break so easily when hit by an object.
Also, the materials should not corrode easily when scratched.
The physical property applies to all the overhead line fittings and their components regardless of their specific functions.
To achieve the highest standards, most overhead line accessories are made of steel and galvanized aluminum.
This is because these two metals are known for their immense strength and resistivity.
In order to counter the effect of rusting, the materials are galvanized.
The material of the fitting should have some level of thickness so as to give some allowance in case of the corrosion.

Design Properties of the Overhead Line Fittings

When you see the term design, what is the first thing that will come into your mind?
To most of us, a design is usually associated with the shape and structural organization of an object.
It dictates how overhead line fittings relate to other essential components of an overhead power line.
There are certain design requirements that an accessory should meet.
First, the design should allow the accessory to move along the insulator or conductor freely.
There should be no frictional force or any other resistance forces that hinder the movement of the fitting.
The dimensions of an accessory should be precise and accurate.
This will allow the accessory to attach itself easily to the conductor without forcing you to make any adjustments.
In terms of the dimension, you should consider the diameter and even the length of the fitting.
The accuracy of the dimension can also prevent the accessory from becoming loose and falling off the conductor
You may also need to consider the weight of the accessory.
Do you know that an overweight fitting can cause fatigue damages to the conductor?
Another design factor that you need to take care of is the allowance angle at which the accessory can swing from the conductor.
For example, a counterweight stirrup of a suspension clamp has an allowance of 45°.

Mechanical Properties of the Overhead Line Fittings

Mechanical properties define how overhead fittings work.
They also dictate the correlation between the fittings and the conductor.
The first mechanical property that needs to be considered is the turning angle of the accessory.
The fitting should have a well-defined angle at which it can turn without breaking or showing any signs of deformation.
Another mechanical property that you should consider is the amount of force which the accessory will exert on the conductor.
The force should be reasonable. However, it should not be too much such that it can cause physical damage to the conductor.

Electrical Properties of Overhead Line Fittings

Since the overhead lines are for transmitting electricity, the fittings should have several electrical properties.

The first property is the ability to withstand the fault current.
This is the current that flows through the conductor when there is a fault.

It usually happens when the conductors short-circuit each other.
The second property is the accessory should not cause any hysteresis loss.

This is the current loss that is usually caused by magnetic effects.

Choosing the Best Overhead Lines Fittings

Once you know the exact overhead line accessories that you need, the next step is to purchase them.
But, with several models and brands in the market, how do you choose the best accessory?
Obviously, you want something that will give you a true value for your money.
Here are the best tips for choosing overhead lines fittings:

1.Overhead line materials

What material has been used to make the accessory?
Whether it is a suspension clamp or any other fitting, you need to pay attention to the material that has been used.
Choose overhead line fittings that are made of high-quality or premium materials.
It is advisable to choose an accessory that is made of stainless steel or aluminum.
Given that the accessory will be exposed to all vagaries of nature, it should be made of the material that will deal with all the external forces
This is important especially when we consider that some fittings are designed to protect the conductor.
Is the electrical overhead line material hard or tough enough to survive the harshest conditions?
Can it rust if exposed to water under other unfavorable conditions?
Check the specifications of the material as stated by the overhead line fittings manufacturer.

2.The design of the fitting

Take your time to carefully analyze the design of the accessory or fitting.
By design, we simply mean the physical appearance of the accessory.
In terms of the design, look at the measurements of the fitting.
Do they match the requirements of your powerline?
If it is a tension clamp, its dimension should perfectly match with that of the conductor.

3.Cost of overhead line fittings

The price of overhead fittings is one factor that you cannot ignore.
It is important to know how much you will spend on the fittings.
This will knowledge will help you to properly plan for your budget.
Before making the purchase, spare some time to compare the prices offered by different overhead line fittings manufacturers.
By the rule of nature, you will be expected to buy the cheapest overhead line fittings.
However, you should not always rush to buy cheap products.
Instead, analyze the quality of the product.
An accessory can be cheap just because it is made of low-quality material.
As they always say, cheap will be expensive.

Overhead Lines Manufacturer

Do not just buy overhead power lines from anyone.

You should be careful with the manufacturer that you choose.
An overhead line hardware supplier can leave you with either a good or nasty experience.
Some can sell you quality fittings while others will sell you faulty fittings.
On the same note, some manufacturers charge reasonable prices while others will overcharge you.
So what should you do to end up with the best overhead line fittings manufacturers?
Just use the following checklist:

-The Experience of the Manufacturer: How long has the manufacturer been in the industry?
It is always advisable to buy from experienced manufacturers.
This is because they know all the dynamics that revolve around this industry.

-The capacity of the manufacturer: Does the manufacturer have resources and technology to produce the best fittings?

One way of knowing this is by visiting their premises.

-Is the manufacturer licensed? Check if the manufacturer that you are dealing with is licensed to operate in China.
Licensed companies strive to meet strict regulations when selling to their customers.
Let them prove it to you by showing their necessary documents.

-Referrals: People who have bought power lines fittings can refer you to the best manufacturers and suppliers.

-Online referrals: Online platforms such as social media can play a vital role in helping you to find reliable overhead line fittings suppliers in China.