You are here: Home » Products » Industrial Terminal » Push in Terminal Block » PT Push in Terminal Wire Connector Combined Push In Spring Quick Wiring Din Rail Terminal Block
PT Push in Terminal Wire Connector Combined Push In Spring Quick Wiring Din Rail Terminal Block PT Push in Terminal Wire Connector Combined Push In Spring Quick Wiring Din Rail Terminal Block


PT Push in Terminal Wire Connector Combined Push In Spring Quick Wiring Din Rail Terminal Block

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
  • PT6-4-PE



SMICO Push In Din Rail Mounted Terminal Blocks


The Push-in connection terminal blocks reduce the wiring time , and can support simply wiring in places where is only a little space available. You don't need any tool, just insert the cable is ok.

◆ Made from anti Inflaming Nylon PA 66, copper metal.

◆ Connecting, build bridges and labeling large or small conductor cross sections easily for feed through terminal blocks.

◆ Wiring can be handled in a limited space thanks to the compact design and front entry connection.

◆ With universal foot which can be installed on 35mm Standard Din Rail.

◆ Build electric potential distribution by using plug-in bridges in the terminal center.

◆ Available in all accessories: End covers, End Stoppers,Marker strips, Marker carrier, Plug-in bridge, etc.

SMICO’s comprehensive range of DIN rail mounted terminal blocks for power distribution applications offers a range of flexible, space-saving solutions optimized for simple handling and fast installation, even in restricted spaces and challenging conditions, and is available with screw-, PUSH-IN, and tension clamp technology. WPD screw-connection terminal blocks (pictured top right) have a unique form factor with offset screw heads and patented clamping yoke technology to ensure safe and comfortable connections at every echelon level in even confined systems and housings. They also have IECEx-approved self-extinguishing, halogen-free plastic housings with high finger protection per EN 50274, short circuit resistance per the SCCR standard, and four color choices: grey, blue, red, and black, and are ideal for distributing the energy and zero potentials fed into machines and plants one step further to supply applications including industrial motors. WPDB – North America DIN rail, screw-connection terminal blocks safely, flexibly, and economically distribute mains-born power sources (50–1,000VAC and 75–1,000VDC), accommodate large wire sizes and multipole assemblies — including single-, two-, and three-phase groupings — in a compact footprint, and ensure finger-safe connections in industrial applications including material handling, building automation, and power conditioning systems. PUSH-IN WPD terminal blocks for AMC motor connections (pictured bottom) have a unique, three-level design that enables quick and easy installation, safe, pluggable connections, and cross-level wiring in the smallest possible footprint and can even be used as an alternative to potential distribution. WPD terminal blocks with tension clamp connection technology, a universal contact system for all common conductor connection types (pictured top left), support compact power feed-in and distribution via large-cross-section wires and allow users to further distribute power within panels via standard cross-connections. The uniform position of the cross-connection channels allows for convenient potential distribution for wires with cross-section spanning 1.5–16mm2 for both broad application suitability and subsequent system extensions.

Basic Information


Pitch 8.2mm
Number of levels 1
Number of connections 4P
Connection method Push in spring terminal
Protection Level IP20
Work temperature -40~+105℃

IEC Data

Rated Current /
Rated Voltage /
Overvoltage category
Pollution degree 3
Rated impulse voltage 8KV
Conductor cross section solid 0.5-10mm²
Conductor cross section flexible 0.5-6mm²
Conductor cross section flexible,with furrule 0.5-6mm²
Stripping length 10-12mm

UL Data

Use group B C D
Rated Current / / -
Rated Voltage / / -
Rated cross section 26-10AWG - -

Material Date

Insulation material PA66
Insulation material group Ⅲa
Flame retardant grade, UL94 compliance V0
Contact material Copper alloy
Surface characteristics Sn,Plated


Set 1: Prepare the wires to be connected

Set 2: Directly insert the cable, no tools required

Set 3: Screwdriver into the orange button

Set 4: Unplug the wire, the wire withdrawal is complete


1: High-strength spring

2: Copper conductive strip

3: Imported flame-retardant nylon PA66

In-line terminal blocks, PT combined terminal blocks, high current terminal blocks

With the in-line connection technology, wires with a diameter of 0.25 mm or more can be easily connected directly without tools. With contact springs, the wires can be inserted easily and the connection quality is high.


With direct plug-in connection, the pre-treated rigid wire can be connected without tools, saving time

Easily insert wires, saving 50% of effort

The pull button is color-coded to ensure safe wiring and operation

No need to install tools, you can easily release the wire

Unified  complete system accessories to reduce logistics costs

Push-in terminal blocks are part of the  line system

PT combined terminal block

The in-line connection PT series terminal blocks are suitable for connecting various wires with a nominal wire diameter of 1.5 mm to 185 mm.
Just insert a rigid wire with a wire diameter of 0.25 mm? or more or a flexible wire with a cold head into the wiring position, and the wiring is convenient and quick. The contact spring opens automatically, generating sufficient pressing force on the current bar. When installing a thin wire with a wire diameter of 0.14 mm? or more, use a standard screwdriver to unscrew the contact spring.
This series of terminal blocks takes full advantage of the complete system. Various connection technologies and standardized system accessories can be freely combined.

PTV combines the advantages of in-line self-locking technology and screw terminal blocks

The PTV terminal block combines the advantages of tool-free in-line self-locking connection and side access of screw terminal blocks. The terminal adopts the tool-free direct insertion self-locking connection technology, the required wire insertion force is small, the connection is strong in vibration resistance, and the wiring time is saved. In addition, it also adopts the side entry design, the wiring position is clear, and there is no bending radius. Thereby, the vertical wiring between the wiring terminal and the line trough is realized, and it is easier to paste and read the cable identification.

Detailed explanation of in-line connection technology

You can directly connect rigid wires or prefabricated wires with ferrules without tools.

The special spring design can easily insert rigid wires with a wire diameter of 0.25 mm or more and flexible wires with a cold press head to achieve a strong wire pull-out force.

Easily insert wires, saving 50% of effort.

By using the pull-out button, you can use various tools to loosen the wire without directly touching the live parts.

When connecting a flexible wire with a wire diameter of 0.14 mm or more without a ferrule, you only need to easily turn on the pull-out button when inserting it.

The pull button is color-coded to ensure safe wiring and operation.

Front wiring, easily connect various wires.


  • HANG Capacitor Machinery Co., Ltd.
  • Sign up for our newsletter
  • get ready for the future
    sign up for our newsletter to get updates straight to your inbox