You are here: Home » Products » Industrial Terminal » Push in Terminal Block » Установки Терминальных Блоков 2,5 Время Автоматической Феникса Легкой Длинное Прочное
Установки Терминальных Блоков 2,5 Время Автоматической Феникса Легкой Длинное Прочное Установки Терминальных Блоков 2,5 Время Автоматической Феникса Легкой Длинное Прочное


Установки Терминальных Блоков 2,5 Время Автоматической Феникса Легкой Длинное Прочное

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
PT Type F Fused DIN rail terminal block
  • PT2.5-4--PE



SMICO Push In Din Rail Mounted Terminal Blocks


The Push-in connection terminal blocks reduce the wiring time , and can support simply wiring in places where is only a little space available. You don't need any tool, just insert the cable is ok.

◆ Made from anti Inflaming Nylon PA 66, copper metal.

◆ Connecting, build bridges and labeling large or small conductor cross sections easily for feed through terminal blocks.

◆ Wiring can be handled in a limited space thanks to the compact design and front entry connection.

◆ With universal foot which can be installed on 35mm Standard Din Rail.

◆ Build electric potential distribution by using plug-in bridges in the terminal center.

◆ Available in all accessories: End covers, End Stoppers,Marker strips, Marker carrier, Plug-in bridge, etc.

The PT DIN rail mounted terminal blocks from SMICO contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.

The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.

Push-In Connection Terminal Blocks

Basic Information


Pitch 5.2mm
Number of levels 1
Number of connections 4P
Connection method Push in spring terminal
Protection Level IP20
Work temperature -40~+105℃

IEC Data

Rated Current /
Rated Voltage /
Overvoltage category
Pollution degree 3
Rated impulse voltage 8KV
Conductor cross section solid 0.2-4mm²
Conductor cross section flexible 0.2-2.5mm²
Conductor cross section flexible,with furrule 0.2-2.5mm²
Stripping length 8-10mm

UL Data

Use group B C D
Rated Current / / -
Rated Voltage / / -
Rated cross section 26-14AWG - -

Material Date

Insulation material PA66
Insulation material group Ⅲa
Flame retardant grade, UL94 compliance V0
Contact material Copper alloy
Surface characteristics Sn,Plated


Set 1: Prepare the wires to be connected

Set 2: Directly insert the cable, no tools required

Set 3: Screwdriver into the orange button

Set 4: Unplug the wire, the wire withdrawal is complete

1Spring Push Terminals2PT Push in Spring Terminal3Waterproof Plastic Din Rail Electric Terminal Block4SMICO Push in Widely Terminal Quick Wire Din Rail5CE Certified Push in Spring Guide Rail Terminal 6Spring Cage Phoenix DIN Rail Industrial Terminal Blocks7Durable Using Screwless Terminal Block Miniature Rail-mounted Terminal Blocks8Fast Wiring Arrangement Connector Din Rail Combined Push In Spring Screwless Terminal9phoenix contact push–in terminal blocks

1.The reducing bridge allows terminal blocks with different nominal cross sections to be connected with

ease, e.g., a PT 10 push-in terminal block to a PT 2,5. Power blocks can be created quickly using the re-

ducing bridge.

2.The double function shaft can be used to connect any number of terminal blocks with two-position bridges.

The 2 to 50-pos.bridges allow up to 50 terminal blocks to be bridged in one step.

3.A jumping bridge is created by removing individual contact guides from the standard bridge. Two

potentials can then be routed in parallel. The contact points can also be marked.

4.The P-FIX isolated feed-through connec-tor, P-DI isolating plug, P-CO component plug, and P-FU cartridge

fuse plug can be used in the universal plug-in zone of the dis-connect terminal block.

5.A test plug with a 2.3 mm diameter is available for measuring lines. All measure-ment and test work can

be completed at speed using test adapters for 4 mm diame-ter test plugs and the modular test plugs.

6.As well as offering a testing facility in the double function shaft, all push-in technology terminal

blocks offer an additional test con-tact for test plugs with a 2.3 mm diameter.

7.Push-in COMBI terminal blocks are avail-able for the plug-in configuration of signal wiring. The system

is touch-proof and offers self-assembly plugs with extensive accesso-ries.

8.Auto flat-type fuse terminal blocks with a 4 mm2 conductor connection are available in the same shape as

the feed-through ter-minal blocks. All terminal blocks can be con-tinuously bridged with one another with

the double function shaft.

9.The compact lever-type fuse terminal blocks are of the same shape as the feed-through terminal blocks and

can be labeled and bridged continuously. A time-saving po-tential distribution is easily created using a

jumping bridge.

With the in-line connection technology, wires with a diameter of 0.25 mm? or more can be easily connected directly without tools. With contact springs, the wires can be inserted easily and the connection quality is high.


With direct plug-in connection, the pre-treated rigid wire can be connected without tools, saving time

Easily insert wires, saving 50% of effort

The pull button is color-coded to ensure safe wiring and operation

No need to install tools, you can easily release the wire

Unified  complete system accessories to reduce logistics costs

Push-in terminal blocks are part of the line system

PT combined terminal block

The in-line connection PT series terminal blocks are suitable for connecting various wires with a nominal wire diameter of 1.5 mm to 185 mm.
Just insert a rigid wire with a wire diameter of 0.25 mm or more or a flexible wire with a cold head into the wiring position, and the wiring is convenient and quick. The contact spring opens automatically, generating sufficient pressing force on the current bar. When installing a thin wire with a wire diameter of 0.14 mm? or more, use a standard screwdriver to unscrew the contact spring.
This series of terminal blocks takes full advantage of the  complete system. Various connection technologies and standardized system accessories can be freely combined.

PTV combines the advantages of in-line self-locking technology and screw terminal blocks

The PTV terminal block combines the advantages of tool-free in-line self-locking connection and side access of screw terminal blocks. The terminal adopts the tool-free direct insertion self-locking connection technology, the required wire insertion force is small, the connection is strong in vibration resistance, and the wiring time is saved. In addition, it also adopts the side entry design, the wiring position is clear, and there is no bending radius. Thereby, the vertical wiring between the wiring terminal and the line trough is realized, and it is easier to paste and read the cable identification.

Detailed explanation of in-line connection technology

You can directly connect rigid wires or prefabricated wires with ferrules without tools.

The special spring design can easily insert rigid wires with a wire diameter of 0.25 mm? or more and flexible wires with a cold press head to achieve a strong wire pull-out force.

Easily insert wires, saving 50% of effort.

By using the pull-out button, you can use various tools to loosen the wire without directly touching the live parts.

When connecting a flexible wire with a wire diameter of 0.14 mm or more without a ferrule, you only need to easily turn on the pull-out button when inserting it.

The pull button is color-coded to ensure safe wiring and operation.

Front wiring, easily connect various wires.


  • HANG Capacitor Machinery Co., Ltd.
  • Sign up for our newsletter
  • get ready for the future
    sign up for our newsletter to get updates straight to your inbox