You are here: Home » Products » Aerial Power Fitting » Dead End Clamp » SM116 Anchoring Clamp for 4X25 Mm2 Aerial Bundled Cables

SM116 Anchoring Clamp for 4X25 Mm2 Aerial Bundled Cables

Share to:
  • SM116
  • SMICO
  • 4x(25-35)
Availability:

This clamp is designed to anchor the low voltage fully supportedA.B.C.(Aerial Bundled Conductors).


Description

- The arms are made of hot-dip galvanised steel. A bolt enables the clamp to be easily dismantled manually and anchored on a bracket fixed to a pole or façade. 

- The cleats are made of UV resistant, glass fibre reinforced synthetic material. 

- The conductors are attached using a combination of bolts and cleats. Two 17mm shear head nuts are used to control the tightening torque. 

- Each conductor runs through a separate channel. The conductors are anchored by distributing the loads, protecting the insulation. 

- A large opening facilitates the passage of the conductors between the clamp arms. 


Implementation

- Unscrew the nuts. 

- Open the A.B.C and insert each conductor into one of the channels. 

- Screw the nuts alternately using a 17mm spanner until the shear head breaks. The 21mm head is only provided for possible dismantling. 

- Anchor the clamp on a hook. 

- Additional tightening is achieved automatically by the cleats.


Material: Mild Steel ,Nylon plus fiber glass

Product property : It is used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor .

ModleConductor Cross-Section(mm2)
SM1164X(25-35)
SM1174X(50-120)
SM1184X(50-120)



Previous: 
Next: 
  • HANG Capacitor Machinery Co., Ltd.
  • Sign up for our newsletter
  • get ready for the future
    sign up for our newsletter to get updates straight to your inbox
    Subscribe