PAL1000
SMICO
35-50mm²
NFC 33-042, EN 50483-3
700000/month
UV PA66
Availability: | |
---|---|
Dead End Clamp PAL1000 is used for tightening LV ABC with insulated conductor and its function is to receive LV ABC on the places where it is technically defined. Its design provides easy, fast and reliable installation in all weather conditions. It is installed using no tools and do not contain parts which can fall off. Dead End Clamp PAL1000 consists of the body casted of aluminum alloy and self-adjusting plastic wedges which tighten the conductor without insulation damage. All parts of Dead End Clamp PAL1000 are resistant to corrosion, environmental effects and UV radiation. Maximum turning angle is 45 degrees for one-sided tightening and 90 degrees for twosided tightening. Minimum breaking strength is 10 kN. The Clamp is delivered with hot-dip galvanized or stainless steel cord.
Dead End Clamp PAL1000 is used for tightening LV ABC with insulated conductor and its function is to receive LV ABC on the places where it is technically defined. Its design provides easy, fast and reliable installation in all weather conditions. It is installed using no tools and do not contain parts which can fall off. Dead End Clamp PAL1000 consists of the body casted of aluminum alloy and self-adjusting plastic wedges which tighten the conductor without insulation damage. All parts of Dead End Clamp PAL1000 are resistant to corrosion, environmental effects and UV radiation. Maximum turning angle is 45 degrees for one-sided tightening and 90 degrees for twosided tightening. Minimum breaking strength is 10 kN. The Clamp is delivered with hot-dip galvanized or stainless steel cord.