You are here: Home » Products » Aerial Power Fitting » Dead End Clamp » NES-B3 Four Wires Low Voltage Cable Anchoring Clamp
NES-B3 Four Wires Low Voltage Cable Anchoring Clamp NES-B3 Four Wires Low Voltage Cable Anchoring Clamp


NES-B3 Four Wires Low Voltage Cable Anchoring Clamp

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
  • NES-B3


  • 4x(25-120)


This clamp is designed to anchor the low voltage fully supportedA.B.C.(Aerial Bundled Conductors).


- The arms are made of hot-dip galvanised steel. A bolt enables the clamp to be easily dismantled manually and anchored on a bracket fixed to a pole or façade. 

- The cleats are made of UV resistant, glass fibre reinforced synthetic material. 

- The conductors are attached using a combination of bolts and cleats. Two 17mm shear head nuts are used to control the tightening torque. 

- Each conductor runs through a separate channel. The conductors are anchored by distributing the loads, protecting the insulation. 

- A large opening facilitates the passage of the conductors between the clamp arms. 


- Unscrew the nuts. 

- Open the A.B.C and insert each conductor into one of the channels. 

- Screw the nuts alternately using a 17mm spanner until the shear head breaks. The 21mm head is only provided for possible dismantling. 

- Anchor the clamp on a hook. 

- Additional tightening is achieved automatically by the cleats.

Material: Mild Steel ,Nylon plus fiber glass

Product property : It is used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor .

ModleConductor Cross-Section(mm2)

  • HANG Capacitor Machinery Co., Ltd.
  • Sign up for our newsletter
  • get ready for the future
    sign up for our newsletter to get updates straight to your inbox