JGB-2
SMICO
50-95mm²
NFC 33-041, EN 50483-3
700000/month
Aluminium alloy body
Availability: | |
---|---|
Product information:
Anchoring clamp JBG-2 is wedge type, designed to anchor insulated messenger, in LV ABC insulated overhead systems, up to 1 KV.
Applied on cable from 50-95 mm2 in main electric connections.
Anchor clamp JBG-1 is made of stainless steel wire bail, UV resistant, FG reinforced polymers, high strength aluminium.
Tension clamp JGB-1 is self-adjusting compared to bolted clamps, this simplify the installation process, and allows installations of closed drive hooks, pole brackets and other low voltage cable brackets and other pole fittings and hardware.
Modle | Cross-Section(mm2) |
PAM-06 | 16-20 |
PAM-07 | 16-25 |
PAM-08 | 16-25 |
DR1400 | 25-35 |
DR1500 | 35-70 |
DR1600 | 35-70 |
DR1700 | 70-150 |
JBG-1 | 35-70 |
JBG-2 | 50-95 |
Product information:
Anchoring clamp JBG-2 is wedge type, designed to anchor insulated messenger, in LV ABC insulated overhead systems, up to 1 KV.
Applied on cable from 50-95 mm2 in main electric connections.
Anchor clamp JBG-1 is made of stainless steel wire bail, UV resistant, FG reinforced polymers, high strength aluminium.
Tension clamp JGB-1 is self-adjusting compared to bolted clamps, this simplify the installation process, and allows installations of closed drive hooks, pole brackets and other low voltage cable brackets and other pole fittings and hardware.
Modle | Cross-Section(mm2) |
PAM-06 | 16-20 |
PAM-07 | 16-25 |
PAM-08 | 16-25 |
DR1400 | 25-35 |
DR1500 | 35-70 |
DR1600 | 35-70 |
DR1700 | 70-150 |
JBG-1 | 35-70 |
JBG-2 | 50-95 |