You are here: Home » Blog » Blog » Dead end clamp Installation

Dead end clamp Installation

Views: 8     Author: Site Editor     Publish Time: 2022-07-30      Origin: Site

1.Pull out the wedges from the dead end clamp / anchor clamp to make space for messenger line insert.

2.After previous step, place appropriate messenger line into the dead end clamp’s space of the wedges

3.Press the both wedges into the dead end clamp along with messenger line. Direction shown on the right picture. Manufacturer advises to easily knock with small hammer both wedges to achieve better fixation

4.Place the installed tension clamp on hook, bracket or other similar hanging segment on the wall, pole, etc

  • HANG Capacitor Machinery Co., Ltd.
  • Sign up for our newsletter
  • get ready for the future
    sign up for our newsletter to get updates straight to your inbox